| Item |
Parts |
Pcs |
Materials |
| 1 |
Body (2 Way or 3 Way) |
1 |
PVC, ABS |
| 2 |
Rotor Gate |
1 |
PPG |
| 3 |
Seal Retaining Plate |
1 |
PPG |
| 4 |
Retaining Plate Screw |
2 |
SUS304 |
| 5 |
Rotor Seal |
1 |
EPDM |
| 6 |
Bearing |
2 |
ABS |
| 7 |
Rotor O-Ring |
1 |
EPDM |
| 8 |
Rotor Shaft |
1 |
PPG |
| 9 |
Lid |
1 |
PVC, ABS |
| 10 |
Lid O-Ring |
1 |
EPDM |
| 11 |
Lid Lock Ring |
1 |
ABS |
| 12 |
Handle |
1 |
ABS |
| 13 |
Set Pin |
1 |
BRASS |
| 14 |
Spring |
1 |
SUS410 |
Viton® ,Teflon® are trademarks of DuPont Performance Elastomers.
Size Inch |
D1 | d |
P |
L |
D2 |
H |
1 |
Body Test Press PSI |
| Socket |
Thread |
| 1/2" |
0.591 |
0.840 |
NPT 1/2" |
0.875 |
3.110 |
1.378 |
1.820 |
2.756 |
222 |
| 3/4" |
0.787 |
1.050 |
NPT 3/4" |
1.000 |
3.543 |
1.575 |
2.244 |
3.031 |
222 |
| 1" |
0.984 |
1.315 |
NPT 1" |
1.125 |
4.134 |
1.890 |
2.402 |
3.504 |
222 |
| 1 1/4" |
1.260 |
1.660 |
NPT 1 1/4" |
1.250 |
4.764 |
2.126 |
2.598 |
3.504 |
222 |
| 1 1/2" |
1.535 |
1.900 |
NPT 1 1/2" |
1.375 |
5.000 |
2.441 |
2.913 |
4.370 |
222 |
| 2" |
1.969 |
2.375 |
NPT 2" |
1.500 |
5.8655 |
2.953 |
3.150 |
5.472 |
222 |
| 2 1/2" |
1.969 |
2.875 |
NPT 2 1/2" |
1.750 |
7.638 |
3.622 |
4.213 |
6.378 |
222 |
| 3" |
2.559 |
3.500 |
NPT 3" |
1.875 |
9.173 |
5.236 |
6.575 |
9.055 |
148 |
| 4" |
3.071 |
4.500 |
NPT 4" |
2.250 |
9.606 |
5.236 |
6.575 |
9.055 |
148 |
Thermoplastic Pool & Spa Valves are manufactured for
either two way or three way flow direction. Body is one
piece. The stem and sealing unit is of the rotary type.
The self locking handle makes it easier to use and adjust
and the lock ring closure allows quick and easy maintenance
without special tools.
PVC, ASTM D-1784 (white)
PPG, Polypropylene Glass reinforced
EPDM, Ethylene Propylene Diene Monomer
ABS
ASTM - D2467 (PVC, SCH-80)
ASTM - D2464 (PVC, SCH-80)
2" - 3 Way Valve
10,000 Cycles under 70 psi water pressure at ambient temperature.
Leak Testing: tests were performed after
each 5000 cycles at 70 & 100 psi working pressure at
ambient temperature.
No Leakage Occurred!
Valve was not lubricated during the 10,000 cycles. Valve
body was tested at 225 psig water pressure for 15 minutes.
Results - No leakage, no structural damage.
Not recommended for compressed air or gas
service.
For more information about our products please go to our Information Request page
Thermoplastic Valves Inc. 53 South Seventh Street Emmaus, PA 18049
610-967-6388 FAX: 610-967-6448 • email: tvi2@fast.net